Other Accessories

Gauge Syphon(GS001)

Syphons allow heat to dissipate, and protect instruments from high temperature. They prevent live system contact with theinstrument. These coiled pipes are available in alloy steel or stainless steel with butt weld or threaded ends. Optional IBR approval is offered, depending  upon customer requirements.

Gauge Syphon (GS 002)

This gauge syphon is designed to replace the earlier model known as pigtail systhon and this reduces space, weight overhanging almost 55%. this provides a thermal barrier between hot vapors and the pressure gauge, pressure switch, instrument, it is easy to install and require nil maintenance.

Quick release Coupling

Designed for pneumatic and hydraulic line application, these fittings can be quickly connected and disconnected without spillage, while the system in operation. Port varies from” 1/8 to 2” and is available with BSP/NPT. Proof pressure up to 400BAR.

Pipe Clamps

These clamps eliminate vibration due to their unique construction. They are available in sizes ranging from 1/8”to 6” they make piping neat and sturdy and also ensuring fittings  and connections do not get loosened. HDPE/ Aluminum/ St. steel body with top and bottom steel plates.

Oval flange adaptor

safe and simple connection from process impules line to instrument or manifold.

Specifications:

• Pressure rating 6000psi
• Seal ring PTFE/ Graphoil (optional)
• Body material SS316L / SS316 other material on optional.
• Tube size: 10mm, 12mm or ½ O.D. (optional)
• Butt weld / socket weld connections available (optional)
• NACE compliance available on request.

Flange to compression connector

integral body single piece connector. Top switch from piping flange standards to instrument compression with minimum cost and better safety. Eliminates the need for additional connections

Specifications:

• ½ “ to 2” NB Flanges to ANSIB16.5
• Class: 150 to 2500 lbs
• Compression fitting : 1/4” to 1” O.D.( 3mm to 25mm O.D.)
• Flange sealing raised face / RTJ
• Variety of a materials available
• NACE compliance available on request

Other accessories mounting brackets

mounting brackets used for mounting manifold to the 2” stanchion pip and the instruments gets mounted to the manifold.

Features :

• No need to go root valve to isolate the instrument
• I solution valve of the manifold can be used to isolate the process and remove instrument for calibration.
• Local calibration can also be done using the vent port of the manifold
• Saving of ordering instrument ahead of the required schedule.
• As the ‘L’ bracket has ‘2’ NB radius, there is total surface contact available as against conventional mounting bracket line contacts

#Bracket Part No MB001 (Patent pending). “L” Type

#Bracket Part No MB002 “C” Type